Three-disk magnetic separator is suitable for sorting ore size less than 2-3mm of weak-magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. Three-disc electromagnetic separator have CP-500, CP-600 two models.
Main Features
It has a reasonable structure, small footprint, simple operation and maintenance, it could separate variety of ferromagnetic minerals, weakly magnetic, non-magnetic and so on in the same time. It’s best choice for water-shortage mines.
1. Small capacity (80-800kg/h depend on the disk diameter)
2. With 3 pcs disk
3. Each disk is with Adjustable magnetic intensity from 1000-20000 Guass, can adjust according to minerals magetic intensity.
4. 4 different minerals can be obtained at the same time by useing this magnetic divice.
5. High intensity with dry processing
6. Low power consuption.
7. The moisture of feeding material shall be under 1%.
Working Principle
This machine is widely used in ilmenite, monazite, tungsten, tin, tantalum, iron ore and other minerals with magnetic and non-magnetic dry sorting. Three-disc electromagnetic separator suits for a variety of strong magnetic minerals mixed ore separation, according to the difference of magnetic minerals, could achieve efficient separation. It can form different magnetic intensity by adjusting the excitation current levels, can also adjust each disk level and sensing distance between dressing grain, to get different magnetic induction intensity, reach a one-time separation for mixed type minerals.
Our main products include Feeding Equipment, Crushing Equipment, Trommel Screen, Vibrating Screen, Ball Mill, Wet Gold Grinding Pan Mill, Spiral Classifier, Shaking Table, Mineral Jigger Machine, Spiral Chute, Centrifugal Gold Concentrator, Vibrating Sluice Box, Carpet Sluice Box, Gravity Separator, Flotation Separator, Magnetic Separator, Mixing Tank, Pump, Hydro cyclone, Sand Making& Washing Equipment, Laboratory Equipment.
We’d like to recommend a suitable model for you and send you a best quotation. So please give us some more information about your requirement in your enquiry.
1) What's the capacity per hour would you want ?
2) What 's the raw materials do you want to process?
Model | CM3-600 Belt type |
Magnetic Intensity | 2 mm from the ground tooth plate 1800 mSv |
Disc Qty. | 3pcs |
Disk Dia. | 600mm |
Speed | 22-38r./min |
Power | 380v/3 phase/four-wire |
Exciting coil | 4sets |
Motor Power | Y112M-6 2.2KW |
Exciting power | 2.2KW |
coil temperature | 65°c |
rated coil current | 1.2-1.9A |
Duty-rating | Continuous |
Feeding width | 300mm |
Feeding size | <2mm |
Dimension | 3150×900×1250mm |
Capacity | 120-800kg/h |
Gross weight | 2200kg |